Goodman DSXC180481: 4-Ton High-Efficiency Air Conditioner with 18 SEER Performance

DSXC180481: Goodman’s Premium 4-Ton 18 SEER Air Conditioning Solution

Looking for a reliable, energy-efficient cooling solution for your home? The Goodman DSXC180481 delivers exceptional performance with its 18 SEER rating and advanced two-stage operation. As a homeowner who wants to balance comfort with energy savings, this 4-ton unit offers the perfect combination of technology and value that Goodman is known for in the HVAC industry.

Key Features of the DSXC180481 Air Conditioner Condenser

The DSXC180481 stands out in Goodman’s lineup with specifications designed for optimal cooling performance. This premium unit delivers 47,000 BTU of cooling power while maintaining energy efficiency that can significantly reduce your utility bills compared to older systems.

What makes the DSXC180481 special is its two-stage Copeland® UltraTechâ„¢ scroll compressor. This advanced component allows the system to operate at a lower capacity during mild weather and ramp up to full power only when necessary – creating more consistent comfort while using less electricity.

Other notable features include:

  • R-410A environmentally friendly refrigerant
  • ComfortNetâ„¢ Communications System compatibility
  • Two-speed condenser fan motor for quieter operation
  • High-density foam compressor sound blanket (72 dBA rating)
  • Factory-installed filter dryer
  • Protective switches for loss of charge and high pressure

Ready to upgrade your home cooling system? Click here to check pricing and availability.

Understanding the DSXC180481’s Energy Efficiency

The 18 SEER rating on the DSXC180481 puts this unit in the high-efficiency category. But what does that actually mean for your home and wallet?

See also  Goodman DSXC180601: 5-Ton High-Efficiency Air Conditioner for Large Homes

SEER (Seasonal Energy Efficiency Ratio) measures cooling output divided by energy input – the higher the number, the more efficient the unit. At 18 SEER, the DSXC180481 is significantly more efficient than the 13-14 SEER units that were standard just a few years ago.

Real Cost Savings with the DSXC180481

When you upgrade from an older 10-12 SEER unit to the DSXC180481’s 18 SEER performance, you could see cooling cost reductions of 30-40% depending on your usage patterns and local climate. Even compared to a 15 SEER system, the DSXC180481 provides approximately 7-8% better efficiency.

The two-stage operation further enhances these savings. By running at lower capacity most of the time, the system uses less electricity while maintaining more consistent temperatures – eliminating the energy-intensive start-stop cycles of single-stage units.

See how the DSXC180481 can reduce your cooling costs.

DSXC180481 Installation and System Compatibility

The Goodman DSXC180481 is designed as part of a complete system. To achieve its full 18 SEER rating, this condenser unit needs to be paired with compatible components.

Recommended System Components for the DSXC180481

For optimal performance, the DSXC180481 should be installed with:

  • A matched evaporator coil (such as the CAPF4961C6 for upflow/downflow applications)
  • A variable-speed air handler (the MBVC1601AA-1 is an excellent match)
  • A thermostatic expansion valve (TXV) like the TX5N4 kit
  • A compatible thermostat that can manage the two-stage operation

The physical dimensions of the DSXC180481 unit are 38.25″ high, 35.5″ wide, and 35.5″ deep, with a weight of 290 pounds. You’ll need to ensure adequate clearance around the unit for proper airflow and maintenance access.

Professional Installation Considerations for the DSXC180481

While DIY enthusiasts might handle some prep work, professional installation is strongly recommended for the DSXC180481. The system requires proper refrigerant handling (which legally requires EPA certification), correct line sizing, and precise setup of the two-stage operation.

The electrical requirements include:

  • 208/230V, single-phase, 60Hz power supply
  • Minimum circuit ampacity of 29.3 amps
  • Maximum overcurrent protection of 50 amps
See also  Mitsubishi MSZ-JP09WA Mini-Split: Complete Heating and Cooling Performance Guide

Click here to get your complete DSXC180481 system.

DSXC180481’s Advanced Comfort Features

Beyond energy efficiency, the DSXC180481 excels at creating a more comfortable indoor environment in several key ways.

Two-Stage Operation and Humidity Control

The two-stage compressor in the DSXC180481 is a game-changer for comfort. By running at lower capacity (around 70% of maximum) during moderate cooling demands, the system:

  • Maintains more consistent temperatures with fewer swings
  • Provides better humidity removal through longer run times
  • Reduces the noticeable temperature variations between rooms

This is especially valuable in humid climates, where the DSXC180481’s extended run times at lower capacity remove more moisture from the air than single-stage systems that cycle on and off more frequently.

Quieter Operation with the DSXC180481

The DSXC180481 is designed for quiet operation with several noise-reducing features:

  • High-density foam compressor sound blanket
  • Two-speed condenser fan motor for lower noise during partial cooling
  • Compressor and motor mounts designed to minimize vibration

With a sound rating of approximately 72 dBA, the DSXC180481 runs significantly quieter than older or lower-quality units that might disturb outdoor conversations or bedroom windows near the condenser.

Experience superior comfort with the DSXC180481.

Durability and Warranty Protection for the DSXC180481

Goodman backs the DSXC180481 with impressive warranty coverage, reflecting their confidence in the unit’s build quality and durability.

Cabinet and Component Quality

The DSXC180481’s exterior cabinet features:

  • Galvanized steel construction with baked-on powder paint finish
  • Rust-resistant coated screws
  • Wire fan discharge grille and steel louver coil guard
  • Design that meets the 2001 Florida Building Code for hurricane wind resistance

Inside, the copper tubing with enhanced aluminum fin coil design optimizes heat transfer while providing excellent resistance to corrosion. The factory-installed filter dryer protects the system from contaminants and moisture.

Comprehensive Warranty Coverage

With online registration completed within 60 days of installation, the DSXC180481 comes with:

  • 10-year parts limited warranty
  • Lifetime limited warranty on the compressor (to original homeowner)
See also  Daikin FDMQ24RVJU: Complete Guide to Efficient Concealed Duct Heat Pump Performance

This warranty protection adds significant value and peace of mind to your DSXC180481 investment, covering you against manufacturing defects and premature component failures.

Protect your home comfort with the reliable DSXC180481.

Is the DSXC180481 Right for Your Home?

The 4-ton capacity of the DSXC180481 makes it suitable for homes between approximately 1,800-2,500 square feet, depending on your climate zone, insulation, and other factors.

This unit represents an excellent balance of initial cost and long-term savings for many homeowners. The 18 SEER efficiency level hits the sweet spot where you get substantial energy savings without the premium price of ultra-high-efficiency models.

Consider the DSXC180481 if:

  • Your current system is over 10 years old or inefficient
  • You want lower utility bills and better humidity control
  • You value quiet operation and consistent comfort
  • You’re looking for a balance of quality and value

When properly matched with the right indoor components and professionally installed, the DSXC180481 provides a cooling solution that will serve your home efficiently for years to come. The two-stage operation and high-efficiency design make it particularly well-suited to climates with long cooling seasons where the energy savings will add up quickly.

Ready to upgrade to the DSXC180481? Click here to check current pricing and availability.